Laser-Cut Metal Signs with Your Text
A sign with your text, from a single piece; the template is called "Engraved Tag" in the configurator. The lettering is not engraved but laser cut through the sheet, in a stencil face whose bridges hold the inner shapes of the letters in place. It reads from both sides, never fades and needs no paint.
What it is for: Name plates and machine tags, name signs on doors and letterboxes, labels for shelves, tool walls and control cabinets, signs for workshop and garden, gifts with a name or a date.
Configure a metal signTry it
Change text, font and size and the price follows. The button in the frame opens this exact tag in the configurator.
What a laser-cut metal sign costs
| Size | 1 mm Aluminium AlMg3 | 1 mm Stainless Steel 1.4301 | ||||
|---|---|---|---|---|---|---|
| 1 pcs | 10 pcs | 100 pcs | 1 pcs | 10 pcs | 100 pcs | |
| 60 × 20 mm | €12.51 | €5.76 | €4.14 | €12.74 | €5.97 | €4.34 |
| 80 × 30 mm | €13.70 | €6.33 | €4.57 | €14.10 | €6.70 | €4.90 |
| 120 × 40 mm | €15.09 | €7.04 | €5.09 | €15.86 | €7.75 | €5.72 |
Price per piece incl. VAT, plus shipping, for the lettering "Dynamic Parts" as in the example. Computed when this page loads, with the same formula the configurator uses. A longer text means more cutting and costs a little more. Further materials and thicknesses are available in the configurator.
The limits that matter for this part
- Size: 20 to 600 mm wide, 10 to 300 mm high. The corner radius is free up to half the shorter edge.
- Lettering: three stencil faces, 4 to 60 mm letter height, up to 64 characters. With small lettering the configurator warns when a bridge or a cutout gets too narrow for the chosen sheet thickness.
- Material: any metal in the catalogue, in any thickness listed there. Outdoors, stainless 1.4301 or aluminium AlMg3; indoors, steel DC01 will do, but it rusts when left bare.
- Tolerance: ISO 2768-m, which is ±0.3 mm over 120 mm. The cut edge shows a slight heat tint; deburring is available as a finish.
- Mounting: this template has no holes. For holes, open the template in the sketcher and add them, or glue the tag on.
Common questions about laser-cut metal signs
- Is the text engraved or cut out?
- Cut out. The laser cuts the letters through the whole sheet, which is why only stencil faces are offered: their bridges hold the inner shapes of O, A or B. Engraving that only marks the surface is not something we offer at the moment.
- Which material suits a tag outdoors?
- Stainless 1.4301 does not rust and stays bright. Aluminium AlMg3 is lighter and cheaper and forms a matt, stable oxide layer in air. Steel DC01 is meant for indoors: left bare, it rusts within weeks in the rain.
- How small can the lettering be?
- The template allows 4 mm letter height. Whether that cuts cleanly depends on the sheet thickness: in 1 mm aluminium, 6 to 8 mm is legible and sturdy, in 3 mm steel it should be 10 mm or more. The configurator warns when a bridge gets too narrow for the chosen thickness.
- Can I order several tags with different texts?
- Yes. Each tag is a part of its own: change the text, add to cart, next tag. The quantity discount applies per part, that is to several tags with the same text.
- Can I use my own font or a logo?
- Not in the configurator, which offers the three stencil faces. A logo or a font of your own can be uploaded as a DXF. The contours must be closed, and inner shapes must be tied to the rest by bridges.
Opens the configurator with this template. No account needed, the price is there at once.